Putty Powder GMK50M
Model No. : HPMC GMK50M
Classification : Chemical Auxiliary Agent
Place Of Origin : China
Application Field : Coating Auxiliary Agents
Moisture : ≤5%
Ash : ≤5%
Viscosity(Mpa.s) : 50000
| Selling Units | : | Kilogram |
| Package Type | : | 25kg/bag |
| Picture Example | : |     |
This Viscosity 50000Cps HPMC is developed for skim coat/wall putty.
Wall putty is a decorative material for smoothing the surface of the wall. It is a thick paste paint and an indispensable product before painting. Apply on the primer or directly on the object to remove uneven defects on the surface of the coated object. Skim coating is a great way to make ugly walls and ceilings new again! A skim coat, also known as a level-five drywall finish, is a thin coat of diluted joint compound that can be applied by hand, paint roller or spray rig. Then it's smoothed out by using a drywall knife or trowel. It's an easy way to create flat and uniform surfaces on walls and ceilings so they can be painted or re-textured. As a rule of thumb, you should apply at least two skim coats to achieve a smooth and consistent surface. Below, you will find the top five reasons to apply a skim coat to your walls or ceiling.
| GMK(75℃) | Typical ViscosityLevel (Brookfield DV II，2%) | Viscosity Range(Brookfield DV II,2%) | Viscosity(NDJ Viscometer, 2%) |
| GMK400 | 400 | 300-500 | 300-500 |
| GMK6M | 600 | 5000-7000 | 5000-7000 |
| GMK20M | 20,000 | 15000-20000 | 20,000-40,000 |
| GMK30M | 0,000 | 25000-35000 | 40,000-60,000 |
| GMK40M | 40,000 | 35000-45000 | 60,000-80,000 |
| GMK50M | 50,000 | 45000-55000 | 80,000-120,000 |
| GMK60M | 60,000 | 55000-65000 | 130,000-170,000 |
| GMK70M | 70,000 | 65000-75000 | 170,000-230,000 |
| GMK(60℃) | Typical ViscosityLevel (Brookfield DV II，2%) | Viscosity Range(Brookfield DV II,2%) | Viscosity(NDJ Viscometer, 2%) |
| GME30M | 30,000 | 25,000-35,000 | 40,000-60,000 |
| GME40M | 40,000 | 35,000-45,000 | 60,000-80,000 |
| GME50M | 50,000 | 45,000-55,000 | 80,000-120,000 |
| GME60M | 60,000 | 55,000-65,000 | 120,000-170,000 |
| GME70M | 70,000 | 65,000-75,000 | 170,000-230,000 |
| GMD1050 | 40000 | 35,000-45,000 | 60000-80000 |
| GMD1051 | 50000 | 45,000-55,000 | 80000-120000 |
| GMD3050 | 30000 | 25,000-35,000 | 40000-60000 |
| GMD2016 | 20000 | 15000-25000 | 20000-40000 |
| GMD4016 | 40000 | 35000-45000 | 60000-80000 |
| GMD5016 | 50000 | 45000-55000 | 80000-120000 |
| GMD5018 | 20000 | 15000-25000 | 20000-40000 |
| GMS | Typical ViscosityLevel (Brookfield DVⅡ，2%) | Viscosity Range(Brookfield DVII, 2%) | Viscosity(NDJ Viscometer, 2%) |
| GMS50M | 50,000 | 45000-55000 | 80,000-120,000 |
| GMS60M | 60,000 | 55000-65000 | 130,000-170,000 |
| GMS70M | 70,000 | 65000-75000 | 170,000-200,000 |
| GMS40M | 40000 | 35000-45000 | 60000-80000 |
| GMS30M | 30000 | 25000-35000 | 40000-60000 |
| Typical Viscosity Level (Brookfield DVII，2%) | self-leveling | TileAdhesives | insulation | Mortar,cement-basedmortar | Coating.Rendering | masonrymortar | Tilecaulking | Repairmortar | Manualplaster,gypsum-based | Gypsum-basedsprayplaster | bondingagent | Dailycare | |
| GMK400 | 400 | √ | √ | ||||||||||
| GMK6M | 6,000 | √ | √ | √ | |||||||||
| GMK20M | 20,000 | √ | √ | √ | √ | √ | √ | √ | |||||
| GMK30M | 30,000 | √ | √ | √ | √ | √ | √ | ||||||
| GMK40M | 40,000 | √ | √ | √ | √ | √ | √ | ||||||
| GMK50M | 50,000 | √ | √ | √ | √ | ||||||||
| GMK60M | 60,000 | √ | √ | √ | √ | ||||||||
| GMK70M | 70,000 | √ | √ | √ | |||||||||
| GME30MM | 30,000 | √ | √ | √ | √ | √ | |||||||
| GME40M | 40,000 | √ | √ | ||||||||||
| GME50M | 50,000 | √ | √ | √ | √ | ||||||||
| GME60MM | 60,000 | √ | √ | √ | √ | √ | √ | √ | |||||
| GME70MM | 70,000 | √ | √ | √ | √ | √ | √ | √ | |||||
| GMS50M | 50,000 | √ | |||||||||||
| GMS60M | 60,000 | ||||||||||||
| GMS70M | 70,000 | ||||||||||||
| GMD1050 | 40,000 | √ | √ | ||||||||||
| GMD1051 | 50,000 | √ | √ | ||||||||||
| GMD3050 | 30,000 | √ | √ | √ | √ | √ | |||||||
| GMD2016 | 20,000 | √ | √ | √ | √ | √ | √ | √ | √ | ||||
| GMD4016 | 40,000 | √ | √ | √ | √ | √ | √ | √ | √ | ||||
| GMD5016 | 50,000 | √ | √ | √ | √ | ||||||||
| GMD5018 | 200,000 | √ | √ | √ | √ |
Feature:
- Good water retention will make sure all the additives reach the best performance in the product formulation
- Good workability to increase the efficiency
- Provide good filming property on the surface of the wall putty, could reduce the water absorption of the base wall. Reduce the risk of cracking
- Good sag-resistance property by providing a good viscosity of the wet mortar
-
10JunTest method for water retention of hydroxypropyl methylcellulose ether HPMC -
10JunFactors influencing the viscosity and light transmission of hydroxypropyl methyl cellulose -
10JunThe difference between hydroxypropyl methylcellulose HPMC and hydroxyethyl cellulose